Do you want to know how to use a baitcaster rod and reel? Baitcaster rods and reels are made from aluminum alloy, stainless steel, and synthetic composite materials, and they are styled by a rod with a provoked finger hook in the handle area. Now the question arises: how does it work?
A bait caster reel sits on top of the rod, so the spool corresponds to the rod. It performs well with monofilament, fluorocarbon, and braid line types.
Baitcasting reels are recommended for experienced anglers. When you are utilizing bait caster reels, the spool proceeds with the casting of the line, so it needs a more advanced man to manage these things. If an inexperienced angler or a beginner handles it, the spool starts proceeding faster than your cast is flying. This is called a ‘backlash.’
In this article, I will tell you about the proper use of baitcasting rods and reels, and I will also let you know its pros and cons. So, stay tuned till the end to learn about the conventional use of baitcasting rods.
See more about How To Fix Kid Casters Fishing Pole
Why Use Baitcasting Rods And Reel?
Baitcaster reels are utilized for massive fishes and heavy lures. They can hold the more serious line and permit more extensive casts than spinning gear in the same size range. Bass anglers frequently use lines in the 14-to-17-pound test range.
Spinning reels are easier to use than baitcasting rods, but baitcasting reels are appropriate for immense fishes and ponderous lures. Baitcasters are helpful for heavy lines, but spinning reels are more efficient regarding backlashes.
If you want to make an extensive and accurate cast, fishing a bait caster is best for it, but if you are doing bottom fishing, a spinning reel will be a better option. Choosing between the most often used fishing reel types becomes challenging, but both have their advantages depending upon the condition.
How To Use A Baitcaster Rod And Reel Step By Step Guide
By using a bait caster rod, you can progress your fishing. The style of reels gives us access to use heavier lines. So, it is easy for you to learn the use of a bait caster rod. Hence, it is a professional tool and somehow difficult to use compared to a spinning reel.
The anxiety of Backlash should not discourage you from taking the benefits of a bait caster. Now, let’s begin with the steps to use a bait caster reel to level up your bass fishing.
Reel a Baitcaster:
Firstly, you must reel your bait caster to take your fishing to the next level. You must select the correct fishing line for your rod to be applicable, and you can start reeling. While using monofilament or fluorocarbon, connect the line directly through the spool. Fishing on a braided line is slightly different; it slips on the reel, so it needs backing.
The braided line won’t slip if you hurl an athletic tape around your reel before stranding on the braid. For more convenient backing, reel on a few turns of monofilament and then tie a single knot on your braid.
1. Through all the guides, drift the line on the rods and through the reels.
2. Unfold the line around the reel and bind an Albright knot. Damp the knot, bring it to the main line, and strengthen it.
3. Cut the end of the tag and bring it close to the knot.
4. Bolt the reel of the line towards the rod tip, so it flows off in the same direction as the reel.
5. To maintain the pressure throughout spooling, hold tightness on the line by the force of your thumb and finger.
6. Pursue reeling until it reaches 1/8 inches from the top of the spool.
How To Adjust The Reel?
The next important step is to adjust the reel, through setting it, you may avoid backlashes. Maintain the rod upwards at an angle of 2’o clocks. Strengthen the spool knob and propel the thumb bar. After that, slowly leave the rigidity, so the lure takes 3 seconds to fall on the ground.
Keep checking continuously that the spool falls on the ground. If you find that a backlash will occur, tighten the spool and gradually leave it again. Repeat these steps whenever you tie a new lure; otherwise, it may lead to a backlash.
Steps to set a Baitcaster:
Several steps to start a bait caster are mentioned above:
● Adjust the spool tension.
● Adjust the brake system.
● Adjust the drag system.
● Hold the rod and reel.
How to adjust Brake System?
The brake system decides how swiftly your reel stops after casting the lure. The highest break pressure is 9/Max, and the lowest is 1/Max. When you adjust the rigidity of the spool to maintain a steady fall, the magnetic brake should be applied to 1/Min.
As the brake is adjusted, turn it back as it goes to 9/Max. Also, this will let you cast swiftly. However, lowering the spool tension can result in Backlash. When you learn the proper use of bait caster, find the pleasuring medium and focus on your casting movement.
How to adjust the Drag system?
Circulating the drag system tightly will fend offline from giving while the fish is fighting. You always want to allow some drag. When you are catching a small fish, drag on the looser end. At the same time, capturing the more considerable fish pull on, the tighter end.
How to cast a Baitcaster?
As you have adjusted your reel, baitcasting is not a big problem. I am highlighting some essential steps that will help you to bad cast in no time:
● Push your thumb on the button and line, rod out straight forward.
● Maintain rigidity, and lift the rod over your shoulder.
● Jerk your wrist, release the button, and line over your thumb above the line.
● Before the lure hits the water, stop the line with your thumb.
● Reel the handle forward, lock the spool and turn off the release.
Reel in the line until it reaches 12 inches from the end of the rod. Place your thumb on the button and grasp the reel. Also, grasp the bottom through the grip of your fingers. Press the spool button and continue holding the rod upward; your thumb should be against the line.
Start to make a cast by bending your elbow and up over your shoulder. While holding your spool, wipe the rod tip forward. Release your thumb gradually while figuring the line against your thumb.
When the lure tends to hit the water, exert the pressure of your thumb at the spool line and stop the flow of the line. Push your handle forward to lock in the spool and reel your bait.
Tips to Prevent Backlash:
A backlash occurs due to improper setup and bad casting. Here I am going to share some beneficial tips with you which will help you in bait casting and preventing Backlash.
The line and lure weight must be equal to the rod action: using a heavyweight lure on a lightweight rod is foolish and will destroy your casting. 12 Lb is a good casting setup to improve your performance.
Enhance your casting movements: As we all know, practice makes a man perfect. Always try to cast from different angles. It will help you to enhance your casting ability in a short time.
Don’t try to cast at long distances: Overcasting is not about the speed or distance you move your rod forward. It is more about the liquid motion. Increase your reach by your practice and proper casting setup. By appropriate adjustments, your rod will itself cover long distances without any backlash.
Pros And Cons of a Bait Caster:
Some significant pros of bait caster rods and reels are mentioned in the following section:
● It is a light weighted tool and can hold a heavier line.
● Baitcaster is durable and has stronger drag compatibilities.
● It can hold heavier and larger fish.
● This highly customizable tool takes your fishing to the next level.
● The Baitcaster rod is an expensive tool.
● Sometimes, switching between left and correct orientations is difficult.
● It is a professional tool and hence needs more experience.
At the end of the topic, I hope you would have learned much about the utilization of bait caster rods and reels.
If you want more information about these tools and their working, you may consult a fisher. Many videos may help you to make a start, and with their help and continuous practice, you can easily use the bait caster and level up your fishing.