Today we will discuss How to string a fishing rod? You just brought a new fishing rod to go fishing with your family or friends. However, the fun is mixed with the struggle to thread the fishing rods.
As an angler, no matter what fish you want to catch or where you want to fish, you need to know how to set up your gear. Among them, threading a fishing rod or fishing rod is the most important.
How To String Your Fishing Rod Step by Step
Once you are done with your needed equipment, it is finally time to string your fishing rod.
Here is how to do it.
Assembling The Rod And Spinning Reel
Before you assemble your rod and reels, it’s important to familiarize yourself with the parts. So it will be easier for you to put them together. Especially if you are a beginner and are searching the internet for how to.
Now before assembling the rod and reels, wipe all the pieces with a clean cloth to get rid of any dirt that might scratch it later. Now you need to put the bars together.
Sleeves are connection points or points that are separated by joints between each rod segment. Now carefully hold one sleeve at a 45 degree angle and anchor the other sleeve around it. Push and twist the two sleeves together until the metal loops are aligned.
Now you will need to attach the spinner to the rod. Look for the reel seat at the bottom of the rod and insert the reel. Be careful not to overtighten the reel to avoid snapping or ruining the rod.
Threading The Fishing Rod
The first step is to pick up the silver ring thing in the spinning reel called the bale arm and flip it over to the other side. You can only load the line by opening the bale arm.
Now use a knot, wrap the free end of the line and tie it into a standing line. Make sure the knots are loosely tied. Finally, tie another loose knot at the end of the label up to seven times.
Now you will need to pull the edge of the thread into the loop closest to the eye of the hook and pull it back into the larger loop. If you pull the tag end towards you, the knot will tighten. Finally, trim the end of the label.
You must close the package arm. You can do this by simply turning up, I’m in the opposite direction. An easy way to know how to thread a fishing rod that it’s really closed is if there are no more fishing lines that would come out if you pull the line. Also, here is to learn more about this.
Attach the hook and lure
First, choose your bait. There are different types of lures that you can choose from. There are Popper Bait, Crankbait Bait, Soft Plastic Bait, Spinnerbait Bait, Plug Bait, Jigs, Spoon Bait. You can also choose worms or leeches.
You have to choose the color of the rule you use depending on the weather. If it’s a sunny day, choose a silver lure. The silver rule easily attracts the attention of fish as soon as the sun’s rays reflect on them.
Choose gold if the weather is gloomy. Gold lures have reflective properties that emit light to attract attention. If you want a universal lure, you can use a spinner.
Now thread the line through the eye of the hook. You will also need to secure it by wrapping the end of the tag in a standing row at least five times.
Tuck the label end back in. You can do this by taking the end of the tag and pulling it back through the bait. Now pull it through the big loop where the line is. Make sure you tuck it into the loops one more time so it can get under the line.
Lastly, wind the overhand knot by pulling the mainline. Now create a tight knot at the lure.
How To String A Fishing Rod Equipment That You Need
1. Fishing rod
A fishing rod is a thin and flexible long rod to which a fishing line is attached with a hook at the end. The length of the rod can be from 2 feet to 50 feet. It is usually made of carbon fiber or fiberglass. The type of rod you choose will depend on the type of fish you want to catch.
2. Fishing reels
A fishing reel is a crank winch attached to a fishing rod that is used in reeling and stowing lines. Different types of fishing reels can be found in the market. All have unique advantages and disadvantages. There are bait casting reels, spin casting reels, spinning reels, fly fishing reels.
3. Fishing line
A fishing line is a line that is used for fishing. It is usually a long and thin string, which can vary in material. However, most modern lines are made of braided polymers, nylon or silk. There are three types of fishing lines. One is braided, the other is monofilament and the last is fluorocarbon line.
Anglers choose depending on their weight, durability and overall capacity.
4. Baits or Lures
Some tools are used to attract fish. If you only use a simple hook, it can be more difficult to catch a fish. However, you can use live fish, worms, leeches or artificial bait that mimics the movement of your target fish.
How To String Different Types Of Reels
We previously mentioned the different types of Reels. Now let’s discuss more these different types of Reels and how to string them.
1. How to string a Spin-casting Reels
Spin-casting reels are very popular due to their ease of use. You can handle spin-casting reels quite easily. It is therefore very popular among new anglers.
The first step is to open the cover and remove the old line. Once the cover is open, remove any line still on the spool. Be sure to double check to avoid a massive tangle.
Now put the fishing line in the spool under the cover. Make sure you run the line through the end of the reel that is closest to the pole or hard.
Now that you have the line on, finally keep the tension and wind the line onto the spool. Make sure you hold the line when putting the cover back on. While maintaining tension, wind up and work your way through the rest of the hoops.
2. How to string a fly reel
The fly reel is connected with some creative knots and applications.
The first step is to attach the line to both the tail reel and the fly line. You need to work backwards and start by tying the knots on the back disc first. Always keep tension on the cord. You should knot the line and make sure it can support the weight of your fly.
Lastly, reel them together.
3. How to string a Spinning Reel
A spinning reel is a good alternative if you want some range in your cast. The same mentioned rules apply here.
You should start by inserting the string into the eye of the rod. This is exactly the same process as Spin-casting reels. Now open the cover and wrap the line around the spool. Always apply tension as above to wrap the line tightly around the reel.
Be careful when you get to the edge of the coil as it causes big problems if you overshoot the string count.
Lastly, trim the excess left behind and you’re done.
4. How To String Bait-Casting Reels
Bait casting reels are different from other reels. It requires more knowledge to know how to use the tools.
However, the process of threading baitcasting reels is very similar to Spin casting reels. The difference is more weight. Some tutorials will tell you that you need a helper, but it’s not necessary.
The first step is to slide the line in the same direction as the reel. Pay attention to the direction. Make sure it matches when you feed the line into the reel receiver. Now tie a few tight knots on the spool itself. You want to put tension on the reel. Don’t give them any leeway. Finally, insert the string into the eyelets of the rod.
Common Mistakes Is Stringing Fishing Rods
Anglers make some common mistakes when stringing fishing rods. Even the pros are sometimes frustrated by how easily they make these small mistakes that cause disaster when out on the lake. Avoid the following mistakes.
Overfilling the line
Overfilling the line can cause you serious damage. Depending on the type of reel, you have a 1/4 inch space between the line and the end of the spool. Make sure you don’t go overboard as it will cause an explosion of willpower.
Tying The Wrong Knot
One of the common mistakes anglers make is tying the wrong knot. Tying the wrong knots, especially ones that are too weak to hold the line, can be a critical misstep. Use knots that can withstand the pull of the catch on the line. You can use two knots or double knotting to be safe. Better safe than sorry.
Not Using Enough Tension
When you screw up, you have to stress yourself out. A sagging rope can lead to disaster if you’re not careful. Keeping the strings wrapped too loosely can cause tangling and pulling of the grips. So make sure you triple check that you have pulled the cord tight enough. Then you can’t break the line, I promise.
Using An Improper Type Of Line
It’s incredibly important that you choose the right type of line for your needs because you’d be surprised to know what a difference it makes. The type of materials makes a big difference. Be careful when choosing a line.
1. Braided Lines
Braided lines are a fairly strong proven type for anglers. Although not all braided lines are created equal. Some can hold around 200 pounds. The others will surely be missed. Before you start fishing, make sure you watch your braided line.
2. Monofilament Lines
Monofilament fishing line is the most common choice for modern anglers. They are extremely durable, even though it is a relatively old technology. It is extremely flexible and thanks to this it can transmit the energy of the throw very well.
3. Fluorocarbon Lines
Fluorocarbon is a relatively new type of fishing line. It is very strong and heavy. Holds heavy catches very easily. It is also transparent which is very useful as fish are difficult to spot.
One downside is that it is very prone to tangling due to its sturdiness. So make sure it doesn’t get tangled while fishing.
4. Nanofil lines
Nanofil is made of the same material as the braid. However, it is not knitted. It is very thin, which allows it to have a very wide cast. The thread is also very strong. Overall it is a good choice and a safe party.
Finally, We learn that how to string a fishing rod? Now that your rod has a finishing line on it, you are almost ready to spend your day by the lake fishing. Always make sure you don’t take easy mistakes. Be smart about choosing your lures and baits.
A successful catch depends on how well you have assembled your equipment and how careful you are with them. You might not able to master it on your first try but keep on practicing. You will surely reap the benefits of it.