The Best Guide:How To Oil a Spinning Reel 2022

Spread the love

Would you like to know how to oil a spinning reel? Then you are at the right place. Detailed information about this topic can be found here. The most effective way to ensure that your fishing reel works appropriately and lasts as long as possible is to maintain it.

The most effective way to How To clean Spinning Reel? appropriately and lasts as long as possible is to maintain it.

After you learn how to oil a spinning reel, you’ll be able to repeat the process easily and quickly. However, in this article, we will teach you how to oil your spinning reel properly and maintain its performance. 

When you learn, it won’t take long for you and your equipment to benefit. For the full tutorial, continue reading.

See more about Are Sougayilang Reels Any Good?

 Oiling a Fishing Reel: What You Need

You won’t need much to clean, oil, and lubricate a fishing reel. Here are a few examples:

  • Working in a well-lit environment
  • Three-in-one oil (or reel oil and grease)
  • Cleaning solution: Isopropyl Alcohol
  • A paper towel
  • Using q-tips
  • Some reels may require a screwdriver.

To lubricate metal parts, you can use a 3-in-1 oil instead of oil and grease separately. Several reel oiling kits on the market also require no or very little additional equipment.

Do I Need to Oil My Fishing Reel?

Is my fishing reel oily? This is a question that many anglers ask. That’s definitely something you should do. When you buy some reels, you should even oil them before using them because they sometimes come with insufficient oil. There are many parts to a reel, but the moving parts are the most important.

It reduces friction and temperature and protects these parts from corrosion. It is beneficial to use oils with anti-corrosion properties.

Oiling it begins with cleaning it thoroughly. When you add oil to dirt or any residue, the land will “lock” into the oil and rub against the reel parts every time you use it.

Chemicals or detergents that are too aggressive should not be used to clean the reel. If you need specialized reel products, you can get them. Although these are more expensive, they will not damage the reel. There is a lot of information online, some of which is incorrect. Don’t let that happen.

See more about What Is A Spinning Fishing Rod?

Where Do You Oil a Fishing Reel? [Which Parts]

Anglers need to know where to oil their fishing reels. A lot of parts need to be lubricated.

You first need to clean all the dirt, old oil, and grease from the reel parts. Applying new oil to an old and dirty one is not a good idea.

After all the parts have dried, you can reapply them. If you accidentally use too much grease, be sure to remove the excess oil. Over-lubrication is also a problem. Four parts need to be lubricated that are affected by friction:

The main shaft

Rollers on the line

The knobs

The bail arm springs

A handle

An anti-reverse bearing

The bearings

The gearbox

It is not easy to access some of these parts. Label the reel’s details when you disassemble it so you can reassemble it.

There are also some models of reels that have maintenance ports. This feature is quite useful, especially for beginners, and Shimano is one of the manufacturers with this option. A drop of oil can be poured into an opening regularly without disassembling the reel. 

Nevertheless, this process cannot replace regular maintenance, which must still be done traditionally. As a result, the reel is always well-oiled, and malfunctions caused by inadequate oil content are less likely to occur. Knowing where a fishing reel should be oiled will enable you to choose the right oil.

See more about How To Put A Hook On A Fishing Rod?

 How to Oil a Fishing Reel Step By Step Guide

Now that you know what oils are, let’s talk about how to oil a fishing reel. Here you will find detailed instructions for each reel model as stated by the reel manufacturer. This is merely a general, essential guide. To disassemble and clean a reel.

To oil it, follow these steps:

Step 1: 

The first step is to clean the reel from the outside.

Step 2: 

Disassemble the reel in step two.

Step 3:

The third step is cleaning the parts with a soft cloth, a toothbrush, a cotton swab or anything gentle and small enough. Make sure you use specialized reel cleaning solutions.

Step 4: 

The fourth step is to grease the gears.

Step 5:

The fifth step is to oil the bearings. Remove excess oil by wiping it off.

Step 6:

The next step is to assemble the reel and oil every moving part one by one as each piece is assembled, such as the shaft and knob.

Step 7:

Test the bail connections for oil penetration by flipping them up and down a few times.

Step 8:

The eighth step involves assembling the reel.

Then you’re done. The reel is now ready to be used again. Try fixing the reel or replacing faulty parts if you notice any problems.

However, if you’re unsure how to do this or can’t find the manufacturer’s instructions, ask an experienced angler for help or let the professionals take care of the reel for you.

Video Tiutorial

How To Oil A Spinning Reel(FAQ)

What oil can you use on spinning reels?

The Synthetic oil is the best lubricant for spinning reels.Their lubricating and lightweight qualities allow them to eliminate unnecessary friction caused by moving parts on your reel.

Also,there is no way to emphasize enough how important it is to avoid reel oils that contain TFE.

When you use TFE on your reel, it can be very harmful, so make sure you remove any bottles that contain this additive from your shelf.

See more about Are Abu Garcia Reels Good?

Can you use WD-40 on spinning reels?

You shouldn’t use WD-40 to lubricate your reel since it is a degreaser that breaks down oil and grease.

To keep the spool casting distance as long as possible, lightly grease your gears and oil everything else.

So, when performing your annual maintenance, feel free to use WD-40 on your reel.

The reel won’t be harmed; you can use it instead of a cleaner to remove stuck parts.

How often should you oil your spinning reel?

If you use a fishing rod regularly, you should perform the essential spinning reel maintenance and rod cleaning, as well as a more thorough cleaning each year.

An angler can do a complete cleaning once or twice a year, while professionals perform it more frequently.

Is DIY oiling of fishing reels worth it?

Taking your fishing reel to a professional for oiling can be expensive, and you can also save money by doing it yourself.

Fishing reels can be oiled by themselves if you have access to the necessary materials or a cleaning kit.


It pays to know how to oil a spinning reel? Maintenance extends the life of your equipment and improves your fishing experience.

It is easy for even novices to complete the critical steps involved. If you are still not confident, seek the advice of an experienced fisherman. You can hire professional services if you want to keep your reel clean and well-oiled.

Leave a Comment