In today’s lesson, we’ll talk about how to clean fishing reels?Fishing is a pleasant way to relax and enjoy the outdoors. Maintaining your fishing reel in proper shape is crucial to getting the most out of your fishing excursions.
Reel upkeep is a crucial aspect of the fishing experience. Having a malfunctioning fishing reel will prevent you from catching fish! However, it is astonishing how many people do not know how to clean their fishing reels. Nothing is more annoying than a fishing reel that won’t work.
Whether you’re a novice or seasoned fisherman, maintaining your gear is crucial for a productive outing. You can keep your reel in working condition by following the basic reel maintenance methods.
How to Clean Fishing Reel Step By Step Guide
What Are 7 Steps For Maintaining A Fishing Reel?
Here are seven quick methods for maintaining a fishing reel:
.1 Use a mild detergent to wash your reel.
- Keep your reel in a dry location when not in use.
- Check the reel for damage, then fix or replace any necessary components.
- Avoid getting oil on the line when lightly lubricating the reel.
- The gears will run smoothly and be protected from rust with a slight oil coating.
- Check the bail wire for damage, and if required, replace it.
- Examine the screws.
Reel Cleaning Basics
If you want to keep your fishing reel in good working condition, you must thoroughly clean it. Every five to ten fishing trips, we recommend cleaning your fishing reel. That only applies if you fish in freshwater.
If you’ve been swimming in salt water, you should wash your gear every time you’re done. You already know how damaging saltwater fishing is to metal components.
See more about Are Sougayilang Reels Any Good?
Tools for Cleaning Fishing Reels
- To guarantee a thoroughly clean reel, the correct equipment is required.
- Screwdrivers, two of them. It would help if you always used a standard and a Phillips’s head to manage this task. Also, you might need a few small screwdrivers, depending on how your reel is constructed.
- Small scrub brushes or old toothbrushes.
- Even more confined spaces can be reached with a toothpick.
- Remove any small pieces lodged in your mouth with tweezers.
- A hammer.
- Some cotton swabs.
- A top-notch cleaning agent, such as a boat cleanser. Why would a boat clean? Due to the fact that these are made to handle blood and grease. A fishing reel has everything you need. an offering
Never attempt to clean your fishing reel with a strong solvent. Never use anything like lighter fluid or gasoline. If that sounds crazy to you, know that others have tried it. Solvents are problematic because they damage plastic components and remove the protective layer.
Soaking A Fishing Reel
It is intended to encourage thorough cleaning. We won’t advise doing that in this instance. You are more likely to get something into your gear system if you soak a fishing reel for a long time. Even the top-of-the-line fishing reels can only withstand so much damage and dampness. This will eventually wear it down.
Active covering poses a challenge.
Cleaning Your Reel Prep
Here, we’ll do our part to make things as straightforward as possible. Look up some YouTube videos if you have questions about the procedure. Having the process spelled out in front of you can sometimes be helpful. A trip to a repair shop is also not harmful.
- Keep a notebook close by. Note the order in which you disassemble the objects. The operation of a fishing reel involves many small components. If you’ve never done it, it can be challenging to understand.
- Many people prefer sticky notes as an alternative. Write a number next to the piece, and then stick it to the sticky note. This keeps everything contained.
- There’s a lower chance of confusion. Additionally, you’ll be alerted to any missing items so you can search for them.
- Make sure you have a high-quality analyzer. There are some delicate pieces in your reel’s internal workings. Also, these might get accidentally damaged by your fingers. Tweezers will give you more discretion. Although it may not be immediately apparent, body oils and sweating can erode these fragile regions. Taking proper care of a costly reel is essential.
Taking Apart Your Fishing Rod and Reel
The moment has come to begin cleaning your reel. It would help if you took the revolution off the rod first. Afterwards, disassembling the reel requires persistence and a steady hand.
- Start the procedure by unwinding the line from the spool or taping the bar down. That will stop it from becoming knotted in the future.
- You must disassemble your spin cast reel if you have one. Some of the lines should be fed out before being secured.
- The spinner head and spool should be taken off after opening the reel cover. This would be easier if you had a small wrench.
- Now that the spinner head spool is out of the way, you can remove the central shaft. Next, remove the clutch ring, washers, crank bearing, and handle. It would help if you used your tweezers to handle these portions. Put each one on a paper towel or your Post-it notes and label them in the correct order as you reach them. There will be a lot of tiny, delicate components in this. You don’t want to lose any or forget where they have been.
- After all the parts have been disassembled, you can clean them with your toothbrush. Scrub the interior of the reel assembly with your cleaning solution. After finishing the more significant components,
After that, wipe everything down with a clean rag. Examine each side with tweezers for a second to ensure they are spotless.
It is necessary to grease the components before reassembling them. It is important to use the right reel oil or reel grease in order to avoid corrosion. To begin with, you should lubricate this crank and the shaft. You might be able to strike the pick-up arms, washers, center poles, bushings, and so forth.
The knobs on the reel, the ball bearings, the kick lever, the clutch ring, and the spool release should all be oiled. Make sure everything is working as it should.
See more about How To Put A Hook On A Fishing Rod?
Cleaning a Spinning Reel
The easiest reels to clean are often spinning ones. They are easier to disassemble than cast-and-cast reels. But that doesn’t mean you shouldn’t exercise caution and keep track of all the components.
- The reel needs to be properly cleaned with fresh water. We stated that we wouldn’t advise soaking your reel. But a spin casting reel can benefit from a short bath if you fish in saltwater. It’s a simplee way to get rid of the extra salt you might otherwise forget.
- You should always set up your line and location with a take before you begin.
- Remove the spool first, then scrub it thoroughly with your brush.
- The spool bushings and washers can be removed with tweezers. Afterwards, the handle knobs, pickup pin, and pickup arm can all be detached ..
- The crankshaft can then be worked on after that. Remove the gears, the center shaft, and the clutch screw. Last but not least, you should get rid of the ball bearings and roller wheel. As you remove each item, don’t forget to record it. You should number it so you know how to put it back.
- Use the toothbrush to thoroughly clean each component with some of your cleaning products. Using a soft cloth, dry them off once they’re done. Nothing should be accidentally bent or broken.
- After the ball bearings, spool release, handles, arms, and pickup pin have been cleaned, you can oil them. The ball bearings don’t need to be completely submerged in oil, so be careful not to over-oil them.
- Apply some lubrication to the crank system’s remaining components and main shaft. Additionally, lubrication may be needed for the bushings, washers, pick-up arm, and roller wheel.
- To remove grease, use a cotton swab or a Q-tip. You don’t want it to gather dust and bacteria inside and turn into sticky sludge.
- Put everything back together according to your written instructions. Follow the order in which you disassembled it. As previously mentioned, spinning fishing reels are much more user-friendly than spin casting or bait casting reels.
Cleaning a Baitcasting Reel
Keeping a baitcasting reel clean can be challenging. Take care to secure the line securely. Make sure all small parts are kept track of as well.
You must turn the drag knob loose. The drag system, including the spool, can be removed now.
To clean your reel, use a toothbrush and a bit of water. You should clean the spool’s interior as much as you can.
Turn the track tension knob off. Now you may remove the spool shaft and other components. Choose the gear, shaft guard, pinion gear, and stabilizer bar. You can remove the release slider, bushings, handle knobs, and the spool release.
With the tweezers, remove these pieces one at a time. You can write them on Post-it notes with labels and numbers, or you can note them in your notebook.
Use your toothbrush to thoroughly clean each component. Don’t forget your cleaning agent as well. The trick here is to be gentle, always.
As thoroughly as you can, finish cleaning the reel’s interior. Use a fresh cloth to dry everything off after that.
After cleaning everything, you must lubricate everything a second time. The handle knobs and spool shaft can be oiled. Ensure that the stabilizer bar also has the bail arm springs. Keep in mind that items don’t need to be swimming in oil.
The main gear, shaft guard, pinion yoke, and shaft gear can all be lubricated at this point. To remove any extra, use cotton swabs or Q-tips.
You ought to be able to assemble everything properly at this point. Adhere to your printed instructions.
Keep Your Fishing Line Clean
Rinse your line and spool thoroughly if you fish in saltwater. Wash the entire reel after each usage. If you use a saltwater fishing reel, you will eventually damage any reel. Keep the seawater wet by keeping the air moist. If you clean your rod and reel properly, they will last much longer.
The most effective course of action is to thoroughly clean every time you return from an ocean fishing expedition. You must clean your reel adequately. If you can’t do that, you must at least rinse it. Even if we don’t advocate it, it’s better than doing nothing. Do what you can to reduce clutter if time is of the essence and you cannot perform a thorough cleaning.
How to oil a Fishing Reel Properly
- Wipe salt, sand, and grime from your fishing reels with a soft rug before misting them with water pressure.
- Remove the spool’s top cap, then detach the spool from the reel shaft.
- Remove any dirt around the drag washers on the spool top and caps.
- To get the oil to the spool shaft, put a drop of oil on the base of the post and move the handles.
- To clean the handle, remove the cover, spool, and handle.
- To keep the insertion handles from clogging, put some oil upon insertion.
Don’t Over Lubricate Your Reel
You must apply oil since it will stop rust. When you use oil, for example, you may apply too much lubricant. I’ll use a bit of oil for this. Oil reels are relatively light. Without much pressure, it can spread out and complete its task.
If you use it excessively, it may begin to impair performance. Additionally, as the actual soil becomes soiled, it will clog up more quickly. Eventually, it might be more harmful than not using it at all. Wipe away any excess as you apply it with something handy.
Keep it organized.
The most crucial step in cleaning any fishing reel is this one. When you read the steps we’ve outlined, they seem relatively easy. There are only a few things left to do. However, if you lose track of when you removed each piece and where it was placed, the task may become too much for you to do. Label and number everything. Keep track of its whereabouts so you can return it quickly.
How to Clean Fishing Reel(FAQS)
Q: How should the reel be cleaned after fishing?
Answer: Be sure to keep this in mind after you’ve finished fishing in freshwater or on the sand. Just give it a quick rinse; it only takes a few seconds. Get a hose but refrain from blasting.
Q: How are reels to reels maintained?
ANS: The shaft where the spool is resting has oil on it. As you can see, I’ll use a tiny dab of grease or oil and apply it there. You don’t want to overdo it; less is more.
Q: How are your fishing rod and reel maintained?
ANS: Give the entire rod blank, from tip to butt-covering, a quick wipe-down. Particular care should be taken to ensure that the guides are spotless and debris-free.
Conclusion:
Finally we learn how to clean fishing reel? Maintaining your reel is a crucial part of your fishing experience. If your fishing reel isn’t working right, you won’t be able to catch fish!
There are so many people who are doing this, it’s amazing unaware of the right ways to clean a fishing reel. You can maintain your reel and extend its lifespan by following the easy steps above.
